Antenna Connector - Wavecom GR64 GSM/GPRS Integrator's Manual

Wireless cpu
Table of Contents

Advertisement

6

Antenna Connector

The Wireless CPU's antenna connector allows transmission of the radio frequency (RF)
signals from the Wireless CPU to an external customer supplied antenna. The
connector is a micro-miniature coaxial MMCX through hole-mounted socket.
number of suitable MMCX type, mating plugs are available from the following
manufacturers:
The nominal impedance of the antenna interface is 50 ohms.
Feature
Frequency range (MHz)
Maximum power
Antenna Connector
impedance
Antenna VSWR
NOTE
Figure 30: RF Antenna Pad Dimensions
GR64 Integrators Manual
Page: 82/104
Amphenol
Suhner
IMS Connector Systems
33dBm (2W)
To bypass the MMCX connector, two PCB landing pads are available on
the underside of the Wireless CPU. The integrator can probe these pads
or solder a coaxial cable directly to them. Wavecom; however, cannot
guarantee absolute performance when connecting to the antenna in
this way due to the attenuation such a connection could potentially
cause. When connecting in this way, proceed with care.
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable
GSM850
E-GSM900
824-894
880-960
33dBm (2W)
50 ohms
2.5:1 operating max
GSM1800
GSM1900
1710-1880
1850-1990
30dBm (1W)
30dBm (1W)
A

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents