Supermicro SUPERSERVER 5018D-FN8T User Manual page 95

Chapter 7: AMI BIOS
ARI Forwarding
When this feature is enabled, the Downstream Port disables its traditional device
number to 0 when turning Type1 Configuration Request into a Type0 Configuration
Request. The default value is Disabled.
M.2 PCI-E 3.0 X4
Use this feature to select which firmware type to be loaded for the add-on card in
this slot. The options are Disabled, Legacy, and EFI.
CPU SLOT 6 PCI-E 3.0 X8 OPROM
Use this feature to select which firmware type to be loaded for the add-on card in
this slot. The options are Disabled, Legacy, and EFI.
CPU SLOT 7 PCI-E 3.0 X8 OPROM
Use this feature to select which firmware type to be loaded for the add-on card in
this slot. The options are Disabled, Legacy, and EFI.
PCI-E 2.0 X1 OPROM
Use this feature to select which firmware type to be loaded for the add-on card in
this slot. The options are Disabled, Legacy, and EFI.
Onboard SAS Option ROM
Use this feature to select which firmware to be loaded for the onboard SAS Option
ROM. The options are Disabled, Legacy, and EFI.
Onboard LAN Option ROM Type
Use this feature to select which firmware to be loaded for the onboard LAN. The
options are Legacy and EFI.
Onboard LAN1 Option ROM
Use this option to select the type of device installed in LAN Port1 used for system
boot. The default setting for LAN1 Option ROM is PXE.
Onboard LAN2 ~ LAN8 Option ROM
Use this option to select the type of device installed in the specified LAN Ports
used for system boot. The options are Disabled and PXE.
Onboard Video Option ROM
Use this item to select the Onboard Video Option ROM type. The options are
Disabled, Legacy, and EFI.
7-19