Commissioning Services; Table 6-1 Commissioning Ap Services - Huawei UAP2105 User Manual

6 Routine Operation and Maintenance of the UAP2105

6.1 Commissioning Services

This describes how to trace the Uu interface, Iu interface, and CDT messages to test the services
offered by the AP through the Trace Viewer tool of the Local Maintenance Terminal (LMT).
Prerequisite
l
l
l
l
l
l
Context
Table 6-1

Table 6-1 Commissioning AP Services

Task
Test voice call services.
Test video call services.
Test PS services.
Procedure
Step 1 Log in to the LMT, and then choose Service > Trace Management > Interface Trace Task
to trace the Uu interface, Iu interface, and CDT messages, as shown in
6-2
The AP is powered on, and the AP cell is set up.
Two functional UEs, UE 1 and UE 2, are ready.
If the admission mode of the AP is set to Close or Group, the IMSIs of UE 1 and UE 2 are
added to the AP permission list.
For details about how to configure the AP permission list, see the AHR Operator Guide.
A functional fixed-line phone is ready.
The LMT that matches the AP version works properly.
The CS and PS domains are functional.
describes the basic tasks involved in service commissioning.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Method
UE 1 or UE 2 originates a
voice call to the fixed-line
phone.
UE 1 originates a voice call to
UE 2.
UE 1 originates a video call to
UE 2.
Browse web pages and upload
or download data through a
UE.
UAP2105
User Guide
Expected Result
The voice quality is good
without loud noise.
The voice quality is good
without loud noise.
The voice is clear.
l
The video is clear and
l
fluent.
The voice is synchronized
l
with the video.
Web pages are browsed
normally, and data is uploaded
or downloaded successfully
within the specified time.
Figure 6-1.
Issue 03 (2009-08-20)