Diagnosing Faults; Figure 6-2 Execute Trouble Diagnose - Huawei UAP2105 User Manual

6 Routine Operation and Maintenance of the UAP2105

6.2 Diagnosing Faults

This describes how to diagnose the faults in the AP, faults at the radio network layer, and faults
at the transport network layer on the WebUI and how to view diagnosis results.
Procedure
Step 1 Log in to the WebUI. For details, see
TroubleDiagnose. The Execute Trouble Diagnose page is displayed, as shown in
6-2.

Figure 6-2 Execute Trouble Diagnose

Step 2 Set Diagnose Mode and determine the type of a fault.
l
l
l
Step 3 Set OutPut Mode and determine the output mode of the fault diagnosis result.
l
l
6-4
Equipment Trouble Diagnose: indicates the faults in the AP.
Wireless Trouble Diagnose: indicates the faults at the radio network layer.
transfers Trouble Diagnose: indicates the faults at the transport network layer.
Just Show Abnormity Result: indicates that only fault diagnosis results are displayed.
Show All Result: indicates that all diagnosis results are displayed.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Logging in to the WebUI. Then, choose
UAP2105
User Guide
Figure
Issue 03 (2009-08-20)