Figure 4-2 Connecting The Power Adapter Of The Uap2105 - Huawei UAP2105 User Manual

4 Installing the UAP2105
Procedure
Step 1 Connect the power adapter, as shown in

Figure 4-2 Connecting the power adapter of the UAP2105

To ensure that the UAP2105 runs properly, use the power adapter delivered with the UAP2105.
Step 2 Connect the Ethernet cable.
l
4-4
CAUTION
In PPPoE mode
The UAP2105 is connected to the Ethernet through an xDSL device, such as a modem,
BAS, or DSLAM.
If the Modem
has ...
Only one LAN port
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 4-2.
Then ...
1. Use Ethernet cables to connect the UAP2105 and the
computer for local maintenance to idle LAN ports on a router
or switch.
2. Connect the router or switch to a modem.
For details on connections, see the documents delivered with
the router or switch.
Figure 4-3 shows the cable connections when the modem has
only one LAN port.
NOTE
If no router is configured, you can directly connect the computer for local
maintenance to the modem to configure the modem, and then connect
the computer to the UAP2105 to configure the UAP2105. After the
modem and the UAP2105 are configured, you can directly connect the
UAP2105 to the LAN port on the modem.
UAP2105
User Guide
Issue 03 (2009-08-20)