Huawei UAP2105 User Manual page 38

5 Configuring the UAP2105
Parameter
Location Detect Mode
User Access Policy
PLMNID Display
SMS Content
Step 3 Type parameters (the parameters with red asterisks are mandatory), and then click OK. The AP
user is added successfully.
----End
5-8
Input Value
Cell ID
PLMNID
IP Address
None
Close
Open
Information about the
operator that provides
services
SMS content for location
indication
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
UAP2105
User Guide
Description
Location detection is
performed according to the
macro cell reported by the
AP. The location detection is
used to check the validity of
the AP.
Location detection is
performed according to the
PLMN ID reported by the
AP.
Location detection is
performed according to the
IP address reported by the
AP.
No location detection is
performed for the AP.
Only the UEs in the UE
permission list set in the
AHR can connect to the AP
network.
All UEs under the AP
coverage can connect to the
AP network.
When the PLMNID
Display switch is enabled on
the AP Manager and a UE
camps on the AP cell, the
information about the
operator is displayed on the
UE.
When the SMS Content
switch is enabled on the AP
Manager and a UE camps on
the AP cell, a message
containing the location
indication information is sent
to the UE.
Issue 03 (2009-08-20)