Figure 3-2 Led On The Uap2105; Table 3-1 Led On The Uap2105 - Huawei UAP2105 User Manual

UAP2105
User Guide

Figure 3-2 LED on the UAP2105

Table 3-1

Table 3-1 LED on the UAP2105

Status
ON (red)
ON (blue)
Blinking in red (ON for
1s and OFF for 1s)
Blinking in red (ON for
0.25s and OFF for 0.25s)
Blinking in blue (ON for
1s and OFF for 1s)
Blinking in blue (ON for
0.125s and OFF for
0.125s)
Issue 03 (2009-08-20)
describes the LED and its status.
Description
No AP cell is set up, or an alarm of cell setup failure is generated.
An AP cell is set up. No service is provided, and no interference
exists in the signals of the cell.
Slight interference exists in the signals of an AP cell. The
UAP2105 works properly, but the quality of service (QoS)
deteriorates.
Strong interference exists in the signals of an AP cell. The
UAP2105 cannot work properly.
An AP cell is set up successfully, and services are being provided
in the cell.
Software is being downloaded, or the system is being upgraded.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Introduction to the UAP2105
3-3