Led Indicators - Huawei AP5030DN Product Description

Huawei AP5030DN Access Points
Product Description
Port
The following figure shows ports on the AP5030DN.
Figure 2-2 AP5030DN ports
As shown in







LED Indicators

Type
Default
status after
power-on
Software
startup
status
Running
status
Issue 01 (2014-04-15)
Figure 2-2, each port can be described as follows:
1. Input port for 12 V DC power supply
2. Default button: restores factory settings if you hold down the button more than 3
seconds.
3. GE1: 10/100/1000M port used to connect to the wired Ethernet.
4. GE0/PoE: 10/100/1000M port used to connect to the wired Ethernet. The port can
connect to a PoE power supply to provide power for APs.
5. Console port: connects to the maintenance terminal for AP configuration and
management.
6. Lock port: protects the AP against theft.
Indicator colors may vary slightly at different temperature.
Color
Green
Green
Green
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Status Description
Steady on The AP is just powered on and the software is not
started yet.
Steady on After the system is reset and starts uploading the
after software, the indicator blinks green once. Until the
blinking software is uploaded and started, the indicator
once remains steady green.

Blinking The system is running properly, the Ethernet
once every connection is normal, and STAs are associated
2s (0.5 with the AP.
Hz)

The system enters the Uboot CLI.
2 Hardware Structure
9