Installing Foundation Fieldbus Devices
•
Foundation Fieldbus must be terminated at both extreme ends of the cable for it to work
properly.
•
Please refer to the
Revision 2.0
, available from www.fieldbus.org, for information on installing FF (H1) devices.
Basic PLC configuration with Foundation Fieldbus (H1)
(For hazardous area installations, see
page 18.)
Configuration via
Linking Device
Configuration via
PCI/PCMCIA Card
7ML19985XR82
Foundation Fieldbus System Engineering Guidelines (AG-181)
Wiring setups for hazardous area installations
controller
FC375
LR560 FF
FC375
LR560 FF
SITRANS LR560 (FF)
FF (HSE)
HSE/H1
Linking Device
FF (H1)
PCI/PCMCIA bus
H1 Interface
FF (H1)
on
NI-FBUS
Configurator
PC/laptop
FC375
LR560 FF
NI-FBUS
Configurator
PC/laptop
FC375
LR560 FF
Page EN-9