Gree GWH09TB-D3DNA1A Service Manual page 137

3.7 Sleep Setting
Sleep on: Press Function under the On state of the unit till the unit enters the Sleep setting state. After that, press Enter/Cancel to
Sleep off: When the Sleep function is activated, press Function to enter the Sleep setting status. After that, press Enter/Cancel to cancel
this function.
In the Cooling or Dry mode, the temperature will increase by 1°C(2°F) after the unit runs under Sleep1 for 1hr and 1°C(2°F) after another
1hr.After that, the unit will run at this temperature.
In the Heating mode, the temperature will decrease by 1°C(2°F) after the unit runs under Sleep 1 for 1hr and 1°C(2°F) after another 1hr.
After that, the unit will run at this temperature.
Sleep setting is shown as Fig.3.7.1.
Fig.3.7.1. Sleep Setting
3.8 Turbo Setting
Turbo function: The unit at the high fan speed can realize quick cooling or heating so that the room temperature can quickly approach
the setting value.
In the Cooling or Heating mode, press Function till the unit enters the
setting.
When the Turbo function is activated, press Function to enter the Turbo setting status and then press Enter/Cancel to cancel this
function. Turbo function setting is as shown in Fig.3.8.1.
Fig.3.8.1 Turbo Setting