Gree GWH09TB-D3DNA1A Service Manual page 133

If the product you bought is equipped with wired controller, please refer to the following introductions of wired controller.
1 Displaying Part
1.1 LCD Display of Wired Controller
1.2 Instruction to LCD Display
No. Symbols
1 Swing function
Air exchange function (this function is yet
2
unavailable for this unit).
3 Sleep function (Only sleep 1).
Each kind of running mode of indoor unit
4
(auto mode)
5 Cooling mode
6 Dry mode
7 Fan mode
8 Heating mode
Defrosting function for the outdoor unit.
9
Gate-control function (this function is yet
10
unavailable for this unit).
11 Lock function.
Description
Fig1.1.1 Outline of wired controller
Fig.1.1.2 LCD display
No. Symbols Description
Shield functions (Button operation, temperature setting,
12 SHIELD
On/Off operation,Mode setting are disabled by the remote
monitoring system.)
13
Turbo Turbo function state
Memory function (The indoor unit resumes the original
14 MEMORY
setting state after power failure and then power recovery).
It blinks under on state of the unit without
15
operation of any button.
Energy-saving function (this function is
SAVE
16
yet unavailable for this unit).
17 Ambient/setting temperature value
18 E-HEATER Electric auxiliary heating function.
19 BLOW Blow function.
20
Timing value.
Quiet function (two types: quiet and auto quiet)
21 QUIET
(this function is yet unavailable for this unit).
Table 1.1