Gree GWH09TB-D3DNA1A Service Manual page 118

Steps Procedure
Remove the screws connecting the outer case with
motor support, isolation plate and chassis; lift the
outer case upwards; loosen the clasps of outer
case with right side plate and left side plate, and
then remove the outer case.
outer case
3. Remove right&left side plate
Remove the screws connecting the right side plate
with electric box assy, valve support, chassis and
condenser side plate, and then remove the right
side plate.
right side plate
Remove the screws connecting the left side plate
with chassis, and then remove the left side plate.
left side plate