Connecting To A Lan Or Router - cable matters 201014 User Manual

3.2 Connecting to a LAN or Router

Link LED
Green
Installation Instructions
1) Connect the adapter to a USB-C port on the computer
2) Connect an RJ45 patch cable to the adapter (Cat 6 recommended)
3) Connect the patch cable to a LAN or router port
4) Check the documentation of your LAN or router to configure network access
5) Link and Status LED's should blink to indicate a live connection
NOTE: Download the latest drivers if the adapter is not recognized at
www.cablematters.com/downloads
Troubleshooting Tips
Reboot the computer

Check that the Link and Status LEDs are lit

Turn off all wireless connections

Update the USB drivers from the computer manufacturer

Test the patch cable with a different device or try another USB port

Windows
Search 'Device Manager' > Click on Network adapters > USB 3.0 to Gigabit
Ethernet Adapter
Mac
Apple Menu > System Preferences > USB 3.0 to Gigabit Ethernet
USB-C™ Multiport Adapter with Ethernet
www.cablematters.com
4
Status LED
Yellow