Connecting To A Lan Or Router - cable matters 201044 User Manual

3.3 Connecting to a LAN or Router

Installation Instructions
1) Connect an RJ45 Ethernet patch cable to the Adapter
2) Connect the patch cable to a LAN or router port
3) Connect the Adapter PD port to power for the best performance
4) Connect the Adapter to a USB-C port on the computer
5) Check the documentation of your router to configure network access
Troubleshooting Tips
Disconnect the Adapter and cables, reboot the computer, and reconnect
•
everything
Check that the blue LED is lit on the Adapter
•
Test by turning off all wireless connections
•
Test the patch cable with a different device (Cat 6 is best for GbE)
•
Windows
Device Manager
Search
Controller
Mac
System Preferences
Open
USB-C™ Multiport Video Adapter with Card Reader and PD
Network adapters
>
Network
> >
www.cablematters.com
5
Realtek GbE Family
>
USB 10/100/1000 LAN