Connecting To A Lan Or Router - cable matters 201049 User Manual

3.3 Connecting to a LAN or Router

Link LED
Green
Installation Instructions
1) Connect an RJ45 patch cable to the Adapter (Cat 6 recommended)
2) Connect the patch cable to a LAN or router port
3) Connect the Adapter PD port to a USB charger for the best performance
4) Connect the Adapter to a USB-C port on the computer
5) Check the documentation of your LAN or router to configure network access
6) Link and Status LED's should blink to indicate a live connection
Troubleshooting Tips
Reboot the computer and reconnect the Adapter
•
Check that the Link and Status LEDs are lit
•
Test by turning off all wireless connections
•
Update the USB-C drivers from the computer manufacturer
•
Test the patch cable with a different device or try another USB port
•
Windows
Search 'Device Manager' > Click on Universal Serial Bus devices > USB-C to
Multiport Adapter with Charging
Mac
About this Mac > System Report > Hardware > USB > USB 3.0 Bus > USB 2.0
Hub > USB-C to Multiport Adapter with Charging
USB-C™ to DVI Multiport Adapter with Power Delivery
www.cablematters.com
5
Status LED
Yellow