Radius Configuration - DPS Telecom NetGuardian 832A G5 User Manual

13.1.5 RADIUS Configuration

The TTY interface can also be used to configure RADIUS settings. After entering the IPA for the RADIUS
server, users will be prompted for both a username and password to logon to the unit. This username and
password combination will be verified against the RADIUS database, and not the local database. The local
password database will only be used for front panel craft port access in the event the RADIUS configuration is
making the unit otherwise inaccessible.
Retry
Time-out
IPA
Port
Interface
Secret
Fig. 13.1.5.2
Fig. 13.1.5.
The RADIUS configuration menu using the TTY interface.
Global Settings
How many times the RADIUS server will retry a logon
Enter in the number of seconds before a logon request is
Enter the IP address of the RADIUS server
Port 1812 is an industry-standard port for using RADIUS
Use the drop-down menu to choose between NET1 and
Enter the RADIUS secret in this field
RADIUS logon screen prompts for a Username and Password.
attempt
timed out
Servers 1 / 2
NET2
49