Removal Of The Push-Pull Connector Housing - Axis P551X SERIES Manual Re-Paint

AXIS
COMMUNICATIONS AB
Author: Sven Svensson

5.1.3 Removal of the Push-pull Connector Housing

Step 1
Remove the two screws that hold the Push-pull connector housing and remove the housing.
Tool: Screwdriver Torx8
Torque (when refitting): 0,3Nm
Push Pull Housing
Screws (3x)
66583
MANUAL RE-PAINT INST AXIS P551X/-E
- 6 -
REV: 2
DATE: 2016-04-07
PAGE: 6(23)