Control Button; Network Connector - Axis P1465-LE-3 User Manual

AXIS P1465-LE-3 License Plate Verifier Kit
Specifications
CAUTION
Risk of injury. Hot surface. Do not touch the product when in operation. Disconnect from power supply and allow the
surfaces to cool before performing maintenance on the product.
NOTICE TICE
NO NO TICE
• Risk of damage to SD card. Do not use sharp tools, metal objects, or excessive force when inserting or removing the
SD card. Use your fingers to insert and remove the card.
• Risk of data loss and corrupted recordings. Unmount the SD card from the product's webpage before removal. Do not
remove the SD card while the product is running.
This product supports microSD/microSDHC/microSDXC cards.
For SD card recommendations, see axis.com.
microSD, microSDHC, and microSDXC Logos are trademarks of SD-3C LLC. microSD, microSDHC, microSDXC are
trademarks or registered trademarks of SD-3C, LLC in the United States, other countries or both.
Buttons

Control button

The control button is used for:
• Resetting the product to factory default settings. See Reset to factory default settings on page 70.
• Connecting to a one-click cloud connection (O3C) service over the internet. To connect, press and hold the button
for about 3 seconds until the status LED flashes green.
Connectors

Network connector

RJ45 Ethernet connector with Power over Ethernet (PoE).
Audio connector
• Audio in – 3.5 mm input for a mono microphone, or a line-in mono signal (left channel is used from a stereo signal).
• Audio in – 3.5 mm input for two mono microphones, or two line-in mono signals (using the supplied stereo-to-mono
adapter).
Audio input
1 Tip
Unbalanced microphone (with or without electret
power) or line
2 Ring
Electret power if selected
67
3 Sleeve
Ground