AXIS
COMMUNICATIONS AB
Author: Sven Svensson
5.1.4 Removal of the Chassis Hook
Step 1
Remove the three screws that hold the Chassis hook.
Tool: Screwdriver Torx20
Torque (when refitting): 2,4Nm
Screws (3x)
Chassis hook
When refitting, Please note:
Please note the maximum torque of 2,4 Nm.
5.1.5 Removal of the Screws Bayonett
Remove the three Bayonett screws.
Tool: Screwdriver, Minus Bit
Torque (when refitting): 1,8Nm
Screw Bayonett (3x)
When refitting, Please note:
Please note the maximum torque of 1,8Nm.
66583
MANUAL RE-PAINT INST AXIS P551X/-E
- 7 -
REV: 2
DATE: 2016-04-07
PAGE:
7(23)