Removal Of The Chassis Hook And Lid; Removal Of The Screws Bayonett - Axis P551X SERIES Manual Re-Paint

AXIS
COMMUNICATIONS AB
Author: Sven Svensson

6.1.1 Removal of the Chassis Hook and Lid

Step 1
Remove the three screws that hold the Chassis hook.
Tool: Screwdriver Torx20
Torque (when refitting): 2,4Nm
Screw (5x)
When refitting, Please note:
Please note the maximum torque of 2,4 Nm.

6.1.2 Removal of the Screws Bayonett

Remove the three Bayonett screws.
Tool: Screwdriver, Minus Bit
Torque (when refitting): 1,8Nm
66583
MANUAL RE-PAINT INST AXIS P551X/-E
- 14 -
REV: 2
DATE: 2016-04-07
PAGE:
Chassis hook
Lid
14(23)