Ports, Controls And Indicator Leds - Siemens RUGGEDCOM i803 Installation Manual

Chapter 1
Introduction
Rated for Reliability in Harsh Environments
• Immunity to EMI and heavy electrical surges
• Exceeds IEC 61000-6-2 (generic industrial)
• Hazardous Location Certification: Class 1 Division 2
• -20 to +60 °C (-4 to 140 °F) operating temperature (optional -40 to +85°C or -40 to 185 °F)
• Conformal coated printed circuit boards (optional)
• Die cast aluminum enclosure
Management Tools
• Web-based, Telnet, CLI management interfaces
• SNMP v1, v2, v3 (56-bit encryption)
• Remote Monitoring (RMON)
• Rich set of diagnostics with logging and alarms
Power Supply
• Dual low-voltage DC inputs: 24 VDC (10-36 VDC)
• Compression fit connections
• CSA/UL 60950 safety approved to 85 °C (185 °F)
Section 1.2

Ports, Controls and Indicator LEDs

The i803 features various ports, controls and indicator LEDs on the front panel for configuring and
troubleshooting the device.
Figure 1: Front Panel
1. Power Indicator LEDs
Power Indicator LEDs
Alarm Indicator LED
2
2
1
2. Alarm Indicator LED 3. MicroSD Port
The power indicator LED illuminates when power is being supplied to the device.
The alarm indicator LED illuminates when an alarm condition exists.
3
4. RS232 Serial Console Port
Ports, Controls and Indicator LEDs
RUGGEDCOM i803
Installation Guide
4