Table of Contents
Advertisement
Chapter 1
Introduction
Section 1.2
Management Ports and Indicator LEDs
The RS950G features various ports and indicator LEDs on the front and bottom panels for configuring and
troubleshooting the device.
Figure 1: Front and Bottom Panels
1. Front Panel
2. Bottom Panel
7. Port Status Indicator LEDs
Power Indicator LED
Alarm Indicator LED
HSR Indicator LEDs
PRP Indicator LEDs
2
1
3
4
5
6
7
7
7
3. Power Indicator LED
8. RS232 Serial Console Port (DB9)
This LED indicates the status of the power supply.
• Green = The power supply is supplying power
• Off = Power is off
The alarm indicator LED illuminates when an alarm condition exists.
• Red = Alarm
• Off = No alarm
This LED indicates when HSR mode is enabled.
• Green = HSR mode enabled
• Off = HSR mode disabled
This LED indicates when PRP mode is enabled.
• Green = PRP mode enabled
• Off = PRP mode disabled
8
4. Alarm Indicator LED
5. HSR Indicator LED
RUGGEDCOM RS950G
Installation Guide
2
6. PRP Indicator LED
Management Ports and Indicator LEDs
Advertisement
Table of Contents
