Copper Ethernet Port Specifications; Fiber Optic Ethernet Port Specifications - Siemens RUGGEDCOM i803 Installation Manual

Chapter 4
Technical Specifications
Maximum Switching Voltage
30 VDC
125 VDC
125 VAC
220 VDC
250 VAC
Section 4.4

Copper Ethernet Port Specifications

The following details the specifications for copper Ethernet ports that can be ordered with the i803.
Speed
10/100Base-TX
c
Shielded or unshielded.
d
Auto-crossover and auto-polarity.
e
Typical distance. Dependent on the number of connectors and splices.
f
RMS 1 minute.
Section 4.5

Fiber Optic Ethernet Port Specifications

The following details the specifications for fiber Ethernet ports that can be ordered with the i803.
NOTE
• All optical power numbers are listed as dBm averages. To convert from average to peak add 3 dBm.
To convert from peak to average, subtract 3 dBm.
• Maximum segment length is greatly dependent on factors such as fiber quality, and the number
of patches and splices. Consult a Siemens sales associate when determining maximum segment
distances.
Fixed Fast Ethernet Transceivers
Connector
g
Mode
Type
SM LC
SM LC
MM LC
g
MM = Multi-Mode, SM = Single-Mode
14
Rated Switching Current
Connector Duplex
RJ45 FDX/HDX
Tx λ
Cable Tx min.
(typ.)
Type (μm) (dBm)
(nm)
9/125 1300 -15
9/125 1300 -15
62.5/125 1310 -19
2 A, 60 W
0.24 A, 30 W
0.5 A, 62.5 W
0.24 A, 60 W
0.25 A, 62.5 W
b c
Cable Type
Standard
> Category 5
Tx max. Rx Sensitivity
(dBm) (dBm)
-8.0 -38
-8.0 -38
-14 -32
Installation Guide
Isolation
1500 V for 1 minute
rms
Wiring Maximum
d e
Distance
TIA/EIA
100 m (328 ft)
T568A/B
Rx Saturation Distance
(dBm) (typ.) (km)
-3.0 20
-3.0 20
-14 2
Copper Ethernet Port Specifications
RUGGEDCOM i803
f
Isolation
1.5 kV
Power
Budget
(dB)
23
23
13