24
HP ProLiant DL140 and HP ProLiant DL145 Lights-Out 100i Remote Management
User Guide
– ECC Event Logging
– Mark DMI events as read
– Clear all DMI event logs
4. Press the Enter key to view the options.
5. Press the Esc key to return to the previous screen, or press the F10 key to
save the changes and exit Setup.
You can also view the system event log by entering the selread command at
the remote management card CLI.
Additional network settings
After completing the instructions in the "Using TCP/IP over Ethernet
management port (on page 8)," you can configure additional network settings
using a web browser or the CLI.