Controlling Server Power Through The Cli; Using The System Event Log - HP ProLiant DL140 User Manual
Generation 2 lights-out 100i
remote management processor
Hide thumbs
Also See for ProLiant DL140:
- Maintenance and service manual (112 pages) ,
- User manual (107 pages) ,
- Quickspecs (29 pages)
Table of Contents
Advertisement
22
HP ProLiant DL140 and HP ProLiant DL145 Lights-Out 100i Remote Management
User Guide
Controlling server power through the CLI
1. Log into the remote management processor CLI as described in the "Logging
in to the remote management processor" section.
2. At the command prompt, enter one of the following commands:
– power on—Powers on the server
– power off—Powers off the server
– reset warm—Resets the server
– reset cold—Powers off the server and resets the server after a short
Using the system event log
The system event log lists a short description of each system event. Events that
are recorded include system resets, system power loss, user logins, and
unsuccessful login attempts.
time has elapsed
Advertisement
Chapters
Table of Contents
