Logging In Through The Cli - HP ProLiant DL140 User Manual

14 HP ProLiant DL140 and HP ProLiant DL145 Lights-Out 100i Remote Management
User Guide
2. Enter your user name and password. The default user name is admin, and the
default password is admin.

Logging in through the CLI

To log into the remote management processor through the CLI and enter
Terminal mode:
1. Establish a connection to the remote management processor by launching a
telnet session.
2. Enter the user name at the login: prompt. The default user name is admin.
3. Enter the password at the password: prompt. The default password is admin.
The command prompt displays.
To exit the CLI and enter Console mode, do one of the following: