HP ProLiant DL140 User Manual page 31

Generation 2 lights-out 100i remote management processor

Hide thumbs Also See for ProLiant DL140:

Table of Contents

The PET Destinations section indicates to the remote management processor

where to send the PET if it is configured to send the trap to a remote system. This

section has up to four entries specifying IP and MAC addresses. The address to

use is selected in the Alert Policy Table (shown in the figure).

The Alert Policy Table section has three fields:

•

Policy Enable—This field enables you to selectively enable and disable trap

forwarding.

•

Policy Number—This field enables you to choose a policy that will be used

in PEF configuration.

•

Destination Selector—This field specifies where to send the PET trap from

the destinations defined in the PET Destination section.

Using Integrated Lights-Out 100i

Table of Contents

Chapters

Table of Contents

Proliant dl145