Deleting Your Test Results; Maintaining The Meter; Cleaning - Fluke 1550 User Manual

Deleting Your Test Results

To delete all of your saved test results:
O
1. Press to turn on the Meter.
G
to select the RESULTS function.
2. Press
e
3. Press to access the stored test results.
G
two times to access the DELETE? function.
4. Press
V
5. Press to delete all stored test results or press
mode.
The REALLY DEL? prompt appears.
d
6. Press to confirm the deletion or press
When you press
The delete function deletes all of your stored test results.

Maintaining the Meter

To avoid possible electric shock or personal injury, do not attempt to
repair or service your Meter beyond what is described in this manual.
The Meter should be serviced by qualified service personnel only.
There are no user-replaceable parts inside the Meter.

Cleaning

To avoid possible electric shock or personal injury, remove excess
water from the cloth before cleaning the Meter to ensure that water
does not enter any terminal.
Periodically wipe the case with a damp cloth and mild detergent. Do not use
abrasives or solvents to clean the Meter.
d
, all stored test results are permanently deleted.
Caution
W
Warning
W
Warning
1550 MegOhmMeter
Maintaining the Meter
E
to return to Ready
e
to return to Ready mode.
21