Using The Pushbuttons - Fluke 1550 User Manual

Using the Pushbuttons

Use the pushbuttons (Figure 2) to control operation of the Meter, select test
results for viewing, and scroll through selected test results.
ON/
OFF
1
Item Button
O
1
G
2
V
3
R
4
d
5
e
6
T
7
SCROLL
FUNC. UP
2 3
Turns the Meter off and on.
Function button. From Ready mode, the Function button
scrolls through test voltage selection, ramp test setup, time
limit setup, and results (memory functions). In Results mode,
use the Function button to choose between the view,
download, and delete screens.
Up button. Used to scroll through test voltages, stored test
results, timer duration, and to select memory locations. Also
used to answer "yes" to yes/no prompts.
Scroll button. After you select a memory location, use the
Scroll button to display the test parameters and test results
stored in the memory location.
Down button. Used to scroll through test voltages, stored test
results, timer duration, and to select memory locations. Also
used to answer "no" to yes/no prompts.
Enter button. Used to select the Result function. After you
select the Result function, use the up and down buttons to
move through the stored tests. Use the scroll button to view
test parameters and test results.
Test button. Starts and stops a test. Push and hold the
button for 1 second to start a test. Push the button again to
stop a test.
Figure 2. Pushbuttons
ENTER
DOWN
4 5 6
Description
1550 MegOhmMeter
Operating the Meter
TEST
7
ADB02F.EPS
5