Table of Contents
Advertisement
Shortcut for pairing
The pairing (see page 28) can also be performed by the simple operation below.
• You can operate the buttons while the mode is set to [TME], [L-TM], [PR] or [CT],
and the second hand indicates the second. (If the second hand indicates "CALL",
"MAIL", "LL", or "ACT", press and hold the lower right button
button
for two seconds to cancel the indication.)
• Make sure the watch is sufficiently charged before registration. (See pages 16 and
17.)
When the function hand (2:00 sub dial) indicates "OFF",
Registration [PR]
press and hold the upper right button
seconds or more.
46
This watch utilizes parts duly certified by the adequate technical standards proof
as a low electric power data communication system wireless station utilities under
the Radio Act. Therefore, usage of this watch requires no license from a wireless
or upper right
station. Please use this watch only in the country where it was purchased. Usage
outside of the country where it was purchased may conflict with the relevant radio
acts in each country. Furthermore, this watch has been certified with the adequate
technical standards proof under the Telecommunications Business Act. Therefore,
the following acts may be punishable.
• Disassembling and/or remodeling of this watch
for seven
• Removing the identification number inscribed on the back of the watch
Bluetooth 4.0 wireless technology
The frequency bandwidths used for this watch
2.4: Indicates a wireless facility which uses the 2.4 GHz
2.4 FH 1
band.
FH: Indicates that the FH-SS method is used as the
spread-spectrum method.
1:
Indicates that the distance in which radio interference
may occur is assumed to be 10 m/33 feet or less.
47
Advertisement
Table of Contents
