Table of Contents
Advertisement
Troubleshooting
Make sure the watch is fully charged as outlined on pages 10 to 13 before
proceeding.
1
Pull the crown out to position
The second hand moves to indicate the 30 seconds
position.
Rotate the crown to change the mode to [ 3 0 2 ].
2
All hands and identifications other than the second
hand will indicate the current reference position stored
in memory.
Do not operate the watch until all hands/indications
stop moving.
3
Pull the crown out to position
The second hand indicates the current reference
position.
4
Press and release both the lower right button
and upper right button
When you release the buttons, the watch will vibrate and
all hands will move indicating All Reset is successful.
70
.
.
simultaneously.
Be sure to perform the following operations after All Reset.
1
. Correct the reference position.
After performing the All Reset feature, the watch is in the reference position
mode. Refer to the reference position setting procedure outlined on page
62, starting from step 3.
2
. Adjust the time and calendar (after correcting the reference
position).
• When adjusting using Bluetooth 4.0:
page 34), then obtain the time information (see page 38 and 39).
• When adjusting manually:
Troubleshooting
Connect a smartphone (see
See pages 50 to 55.
71
Advertisement
Table of Contents
