Table of Contents
Advertisement
Instruction manual: CITIZEN Eco-Drive Proximity
Activating the functions of the dedicated app
(continued)
Receiving schedule notification [Schedule Alert]
When you set "Schedule Alert" to "ON", the watch receives schedule
notification from the iPhone connected.
Schedule Alert
ON
• For schedule alert setting, set it on the alert setting of the iPhone's
Calendar.
When receiving schedule notification
The watch vibrates twice and the second hand points "MAIL".
• To return the second hand to normal movement, press and hold
either the lower right button
or upper right button
seconds.
Receiving the leaving-iPhone alert (Bluetooth disconnection
notification) [Bluetooth Link Loss Alert]
When you set "Bluetooth Link Loss Alert" to "ON", the watch alerts
when the communication with the iPhone is closed due to the iPhone
location or other unintentional reasons.
Bluetooth Link Loss Alert
ON
• No notification is sent to the watch if the iPhone and other Bluetooth
devices are disconnected.
When the iPhone is disconnected
The watch vibrates twice and the second hand points "LL".
The watch automatically tries to reconnect with the iPhone once (The
second hand points "ACT".), but close connection if the reconnection
failed and the function hand points the "OFF" area.
• To return the second hand to normal movement, press and hold
either the lower right button
or upper right button
seconds.
Searching for the iPhone [iPhone Search]
When you set "iPhone Search" to "ON", you can send signals to the
registered iPhone in the connectable range with the watch.
When receiving the signal, the iPhone sounds depending on its setting.
iPhone Search
ON
Locating your iPhone using sounds
Press and release both the lower right button
button
simultaneously when the mode of the watch is [TME], [L-TM],
[PR] or [CT] and the second hand indicate second.
The second hand points "ACT" and the signals are started to send.
• It may take up 20 to 30 seconds to start sounding.
• When the switch of "Scan" or "Waiting for Reconnection" is "ON",
the signals can be sent to the disconnected iPhone.
• iPhone sounds even when the muting switch is activated or the
sound volume is set to 0.
• When the earphones are plugged, iPhone does not sound.
a
Receiving email reception notification [Email Alert]
When you set "Email Alert" to "ON", the watch receives email
notification at email arrival to the account set on the dedicated app
"CITIZEN ECO-DRIVE Proximity".
• You can enter up to five mail accounts.
• This function does not notify the receptions of iPhone's Mail and
SMS.
• This app only check existence of new unread mails on mail servers.
You cannot browse mails on it.
When receiving email reception notification
The watch vibrates twice and the second hand points "MAIL".
• To return the second hand to normal movement, press and hold
for two
either the lower right button
seconds.
Setting the mail account
To send the mail reception info to the watch, you have to set mail
accounts on the dedicated app.
• This function is only available for accounts whose mail servers are
compatible with IMAP.
• Prepare IMAP mail account, IMAP mail server addresses for sending
and receiving, user name and password before setting. Consult your
mail service provider for the information required.
• You can set the mail accounts before connection.
1
Tap the app icon to start up the app and tap "Mail Accounts".
2
Tap "+" to add an account.
• Tap an existing account to edit its setting.
for two
3
Select an IMAP mail service you use on the list and tap its name.
• If your mail service is not listed, tap "Other".
4
Enter items required and tap "Done".
Connection test to the mail server starts immediately and the mail
account entered is verified. When the test ends successfully, the screen
of step 2 appears again.
• When the test fails, a failure message appears. Enter items required again.
5
Repeat steps 2 to 4 to set other accounts.
• The accounts set are listed under "Email Alert".
and the upper right
6
Tap "Back" to finish the setting.
Email Alert
ON
or upper right button
for two
Mail Accounts
Mail Accounts
Back
IMAP Setting
Cancel
Done
Email Alert
ON
Account 1
ON
Account 2
ON
b
To delete an existing mail account from the app
Tap "Delete Account" on the screen of an existing account.
• All the settings are deleted as the dedicate app is uninstalled on the
iPhone.
Selecting accounts for which mail reception notification is sent
You can select accounts for mail reception notification by setting them
to "ON" or "OFF".
1
Tap the app icon to start up the app.
Email Alert
ON
Account 1
Account 2
ON
2
Slide the switch for each account under "Email Alert" to "ON" or "OFF".
Adjusting the interval of mail reception notification
You can adjust the interval of mail reception notification.
• The interval set is common to all mail accounts.
1
Tap the app icon to start up the app and tap "Mail Accounts".
2
Tap "Polling Interval".
Polling Interval
3
Tap the interval you prefer.
• Increased use of this feature may affect battery life.
To save power consumption, decrease the polling interval to a less frequent
setting of 15 minutes or more.
4
Tap "Mail Accounts"
"Back" to finish the setting.
Shortcut for registration (pairing)
The registration (see page 5b) can also be performed by the simple
operation below.
• Make sure the watch is sufficiently charged before registration. (See
page 3a.)
When the function hand on the upper right sub dial
Registration [PR]
indicates "OFF", press and hold the upper right
button
for seven seconds or more.
• You can operate the buttons while the mode is set to [TME], [L-TM],
[PR] or [CT], and the second hand indicates the second.
• If the second hand indicates "CALL", "MAIL", "LL", or "ACT", press
and hold the lower right button
or upper right button
seconds to cancel the indication.
c
7
OFF
for two
Hide quick links:
Advertisement
Table of Contents
