Connecting With The Registered Smartphone [Ct] - Citizen YUQ-W760-00M Manual

Connecting with the registered smartphone
If the watch meets all of the conditions below, you can connect the smartphone by
a simple operation of the watch.
• The function hand (2:00 sub dial) indicates "OFF".
• The mode is set to [TME], [L-TM], [PR] or [CT].
• The second hand indicates the second.
(If the second hand indicates "LL" or "ACT", press and hold the lower right
button or upper right button
To connect:
• Ensure that the Bluetooth 4.0 is activated on the smartphone.
Press and release the upper right button
The second hand moves to indicate "ACT". When successfully
connected, the movement of the second hand returns to
normal and the function hand (2:00 sub dial) indicates "ON".
34
[CT]
for two seconds to cancel the indication.)
.
Function hand

Connecting with the registered smartphone [CT]

You can also connect the smartphone by changing the
mode.
1
Change the mode to [CT]. (See pages 18 and 19)
The second hand moves to indicate
"ACT". When successfully connected,
the movement of the second hand
returns to normal and the function hand
(2:00 sub dial) indicates "ON".
• To cancel the operation, pull out the
crown, then return it.
2
Change the mode to [TME] (or [L-TM]) to finish
the procedure.
(See pages 18 and 19)
Function hand
35