Table of Contents
Advertisement
Troubleshooting
Symptoms
The Bluetooth 4.0 (continued)
Check if the smartphone is in communication
distance (5 m / 16-1/2 feet to 10 m / 33 feet)
and avoid obstacles between the watch and the
smartphone.
Time information
Check the connection status ("ON", "OFF").
cannot be obtained
Check if the watch is ready to receive the time
automatically.
information (the mode is set to [TME], [L-TM],
[PR] or [CT] and the crown is in position ).
Check the status of your smartphone (charging or
sleep mode).
This may occur as a result of a pairing (registration)
or connection failure. Pull the crown out to
The second hand remains
position
or , then push it in to position
indicating "ACT" and
this does not work, leave the watch for about two
does not move at all.
or more minutes.
If the second hand still does not move, consult the
nearest Authorized Citizen Service Center.
66
Remedies
Page
−
27
18 to 22
−
. If
−
Symptoms
Movement of a hand seems strange
The hands rotate rapidly
soon after you expose
the watch to light
The power save function is canceled. Wait until the
sufficient for charging
current time is displayed.
(out of a case or pocket,
from under a shirt
sleeve, etc.).
The hands move in an
Check the current mode.
unexpected direction.
Check the current mode. The second hand does
not move in some modes.
The second hand does
Press and release either the lower right button
not move.
or upper right button
indication of Bluetooth 4.0.
The second hand moves
This indicates low power. Fully charge the watch.
once every two seconds.
Troubleshooting
Remedies
Page
14 and 15
18 to 23
18 to 23
to cancel the notification
−
10 to 15
67
Advertisement
Table of Contents
