Citizen YP17747 User Manual

USER'S GUIDE
YP17747(MULTI FUNCTION SPORT WATCH)
CITIZEN WATCH CO.,LTD.
Q&Q SALES DEPARTMENT

Stopwatch

EL Backlight

Dual Time

Alarm
100 Years Calendar Chime
11
100M Water Resistant Battery(CR2025)
100
B U T T O N S
The operation of buttons are indicated by using
the letters shown in the illustration.
" A " " D "
" B " " C "
" E "
A -- Reset
B -- Mode
C -- EL backlight
D -- Start / Stop
E -- EL backlight
D I S P L A Y
The screen shown in below:
Day of week
Date
Hour
Seconds
Minutes
A T T E N T I O N
1. Never try to open the case or remove its back cover.
2. Do not operate buttons under water.
3. Should moisture appear inside the watch,have it
checked immediately by your dealer. Otherwise
it can cause erosion of the metal parts of the watch.
4. Though the watch is designed to withstand
normal use, you should avoid rough use or
dropping the watch.
5. Avoid exposing the watch to temperature extremes.
6. Wipe the watch with dry, Soft cloth only. Avoid all
owing it to come into direct contact with chemical
materials, which can cause deterioration of the
plastic parts of the watch.
7. Avoid to wear the watch in electromagnetic,
static conditions.

MODE SELECTION

Press "B" to change mode to mode in the
following Sequence:
Timekeeping Mode Alarm Mode
Stopwatch Mode Dual Time Mode.
a

TIMEKEEPING

12/24H Format;
Hour, Minutes, Seconds,
Day of week, Date;
100 years Calendar (2000 ~ 2099).
b ALARM
Hourly time signal;
The alarm sounds at the
preset time each day.
c
STOPWATCH
1/100 second unit;
Measuring range:
0'00"00 ~ 23:59'59".
d
DUAL TIME
The time for other time zone.
B A C K L I G H T
The backlight that uses an EL (electro-luminescent)
cause the display to glow for easy reading in the dark.

Use EL Backlight

In any mode, press
"C" or "E" to illuminate the
display about 3 seconds.
a
TIMEKEEPING
12/24H Format
In the timekeeping mode, press "A"
to switch between 12/24H formats.
Calendar
In the timekeeping mode,
press and hold "D" to display:
Year, Month, Date.

Time Setting

1. In the timekeeping mode,press and
hold "A" until the seconds to flash;
(flashing indicated in set mode)
2. Press "D" to reset the seconds ;
3. Press "B" change to the
next selection;
4. Press "D" to increase the number,
press and hold to increase at
high speed;
5. Repeat step 3 and 4, the selection
in the following sequence:
Seconds Hour Minutes
Year Month Date;
6. Press "A" to exit the set state, after
you set.(The day of week is autom-
atically displayed in accordance with
year, month and date setting)
b
A L A R M

Alarm and Chime

In the alarm mode, press
"D" to on/off the alarm
and chime in the
following sequences:
Alarm & Chime off
Alarm on Chime on
Alarm & Chime on.

Alarm Time Setting

1. In the alarm mode, press "A" the
hour to flash, the indicator " "
appear;(flashing indicated in
set mode)
2. Press "D" to increase the hour,
press and hold to increase
at high speed;
3. Press "B" to select the minutes;
4. Press "D" to increase the
minutes,press and hold to
increase at high speed;
5. Press "A" to exit the set state,
after you set.
The alarm sounds at the preset time each day for
about 60 seconds, press any button to break it.
c
STOPWATCH
A Lap Time
1. In the stopwatch mode,
press "D" to start the
stopwatch;
2. To stop the stopwatch
by pressing "D" again;
3. Press "A" to reset the stopwatch.
Split Time
1. In the stopwatch mode,press "D"
to start the stopwatch;
2. Press "A" to display the split time,
stopwatch timing continues
internally;
3. Press "A" to clear the split time and
to continue time measurement;
4. Repeat step 2 and 3, you can
measure themulti split time;
5. Press "D" to stop the stopwatch.
d
DUAL TIME

Dual Time Setting

1. In the dual time mode,
press "A" the hour to
flash; (flashing
indicated in set mode)
2. Press "D" to increase
the hour, press and
hold to increase at
high speed;
3. Press "B" to select the
minutes;
4. Press "D" to change the
minutes; (press once
change 30 minutes)
5. Press "A" to exit the set state, after you set.