Using Local Time [L-Tm] - Citizen YUQ-W760-00M Manual

Using local time
Indicating local time (secondary time)
The watch can indicate the time of another time zone (known as local time) using
[L-TM] mode.
1
Change the mode to [L-TM].
The currently set local time (secondary time) is
displayed.
• The hour, minute, 24-hour, date and day of week are
displayed.
• If a local time (secondary time) has not been set, the
time reflected will be that of the time set in [TME]
mode.
• If you receive the time information while in [L-TM]
mode, both the time set in [TME] and [L-TM] mode are
adjusted.
56
[L-TM]
(See pages 18 and 19)
Setting the local time
The setting range of the time difference from the time set in [TME] mode is ±27
hours in 15-minute increments.
1
Change the mode to [L-TM].
(See pages 18 and 19)
2
Pull the crown out to position
3
Rotate the crown to set the time in 15-minute increments.
• When you rotate the crown quickly a few times, the hands will move
continuously. Rotate the crown either clockwise or counterclockwise to stop
the hands.
4
Push the crown in to position

Using local time [L-TM]

.
to finish the procedure.
57