Citizen YUQ-W760-00M Manual
Citizen YUQ-W760-00M Manual

Citizen YUQ-W760-00M Manual

Bluetooth

Advertisement

Quick Links

Thank you for your purchase of this Citizen watch.
Before using the watch, read this instruction manual carefully to ensure correct
use.
After reading the manual, store it in a safe place for future reference.
Be sure to visit the Citizen website at http://www.citizenwatch.jp/srvc_sprt_menu.
html . Here you will find a variety of information such as electronic setting guides,
answers to frequently asked questions, Eco-Drive recharging information and
more.
To check the movement number
A case number—4 alphanumeric characters
and 6 or more alphanumeric characters—is
engraved on the case back. (Figure on the right)
The first 4 characters of the case number
represent the movement number of the watch.
In the example on the right, "
movement number.
Engraving position example
" is the
The engraving position may differ
depending on watch model.
1

Advertisement

Table of Contents
loading

Summary of Contents for Citizen YUQ-W760-00M

  • Page 1 Thank you for your purchase of this Citizen watch. Before using the watch, read this instruction manual carefully to ensure correct use. After reading the manual, store it in a safe place for future reference. Be sure to visit the Citizen website at http://www.citizenwatch.jp/srvc_sprt_menu.
  • Page 2 Safety precautions — IMPORTANT Before using this watch This manual contains instructions that should be strictly followed at all times After unpacking, the following must be done before using the watch: not only for optimal use, but to prevent any injuries to yourself, other persons or •...
  • Page 3 Authorized Citizen Service Center. releases from the case. it to the case. Be sure to Some repair shops may charge a nominal fee for adjustment if the watch was not tighten firmly.
  • Page 4: Table Of Contents

    Table of contents Features........8 Connecting with the registered Adjusting the time and calendar Eco-Drive (solar powered) watch smartphone [CT] ....34 manually [TME]/[CAL] ..50 handling precautions... 72 Component identification..9 Using local time [L-TM] ..56 Water resistance ....76 Disconnecting from the Charging your watch ....
  • Page 5: Features

    5 Function hand and function up to 60 minutes. indications as well as leap years. • Connection status (see page 27)/ * “Eco-Drive” is Citizen’s proprietary technology. Power reserve level (see pages 16 Lower right and 17) Connectable with your smartphone using Bluetooth 4.0, and button ( ) •...
  • Page 6: Charging Your Watch

    Charging your watch Charging your watch This watch has a rechargeable cell which is charged by When the watch reaches a low charge state (insufficient charge warning exposing the dial to light, such as direct sunlight or function) fluorescent lamps (refer to pages 12 and 13 for charging When the power reserve becomes low, the second hand guidelines).
  • Page 7 Charging your watch Charging your watch Charging time by environment • To charge your watch, it is recommended to expose the dial to direct sunlight. Optimal charging is achieved by exposing the dial to direct sunlight outdoors for Below are the approximate times required for charging when exposing the watch a short time each day.
  • Page 8 Charging your watch Charging your watch Power save function Canceling the power save function If your watch is not exposed to light sufficient for charging for 30 minutes or more, The power save function is automatically canceled and time and date will be the second hand will stop in order to conserve power.
  • Page 9: Checking The Current Power Reserve

    Checking the current power reserve Checking the current power reserve The power reserve level This watch has a power reserve display feature when in [TME], [L-TM], [PR], [CT], Level Level 3 Level 2 Level 1 Level 0 or [DCT] mode. With Bluetooth 4.0 Power reserve indication (Mode hand) Up to 10 days...
  • Page 10: Changing The Mode

    Changing the mode Changing the mode Rotate the crown to select a mode. • Each time you rotate the crown, the mode hand moves. This watch features eight different modes (functions). Change the mode by rotating Rotate the crown until the mode hand indicates the mode you wish to use. the mode hand before using each mode.
  • Page 11 Changing the mode Changing the mode Mode indications and functions Time — [TME] Bluetooth 4.0 — [PR]/[CT]/[DCT] • Normally, use the watch in [TME] or [TME] [PR] (Pairing) [CT] (Connect) [DCT] (Disconnect) [L-TM] mode. 24-hour hand Function hand The currently set time is displayed. Select this when you want Select this mode when Select this when you...
  • Page 12 Changing the mode Changing the mode Chronograph — [CHR] Calendar — [CAL] The reference position — [302] Local time — [L-TM] [CHR] [CAL] [302] [L-TM] Select this when you want to use the Select this to display the calendar. (See The current reference position of each Select this to display the time of chronograph.
  • Page 13: Using Bluetooth 4.0

    Using Bluetooth 4.0 Using Bluetooth 4.0 Type of Bluetooth 4.0 of this watch This watch supports the Bluetooth 4.0 utilizing the electricity saving technology, What is Bluetooth 4.0? Bluetooth 4.0 (Bluetooth Low Energy). Bluetooth 4.0 is a type of wireless communication technology used over distances In order to communicate with a smartphone, this watch implements following of about 5 m (16-1/2 feet) to 10 m (33 feet) from handheld information products Bluetooth 4.0 Profiles.
  • Page 14 Using Bluetooth 4.0 Using Bluetooth 4.0 Connectable smartphones Indications for Bluetooth 4.0 This watch can be connected with a smartphone that supports Bluetooth 4.0 and is Notification (the second hand) equipped with the profiles described on page 25. Check the compatibility of your smartphone by referring CALL Incoming phone calls Connection status (the...
  • Page 15: Registering Your Smartphone [Pr]

    Registering your smartphone [PR] Registering your smartphone [PR] Connection with the registered smartphone • All information relating to your smartphone once registered with the watch will You need to register each device for connection (this is called “pairing”) to use the be stored in memory, even after disconnection from your smartphone.
  • Page 16 Registering your smartphone [PR] Registering your smartphone [PR] For registration <Watch Operation> • For operation of your smartphone, refer to the instruction manual of your Pull the crown out to position smartphone. The second hand moves to indicate the 30 seconds •...
  • Page 17 “Bluetooth 4.0 settings, ” then activate Bluetooth 4.0 the procedure. (See pages 18 and 19) and start “Scan for device”. If this watch is detected, the name of this watch “CITIZEN W760” will be displayed. Select “CITIZEN W760”, and select “YES” or “OK”.
  • Page 18: Connecting With The Registered Smartphone [Ct]

    Connecting with the registered smartphone [CT] Connecting with the registered smartphone [CT] You can also connect the smartphone by changing the mode. If the watch meets all of the conditions below, you can connect the smartphone by a simple operation of the watch. Change the mode to [CT].
  • Page 19: Disconnecting From The Smartphone [Dct]

    Disconnecting from the smartphone [DCT] Disconnecting from the smartphone [DCT] You can also disconnect the smartphone by changing the mode. If the watch meets all of the conditions below, you can disconnect the smartphone by a simple operation of the watch. Change the mode to [DCT].
  • Page 20: Receiving Time Information From The Smartphone

    Time profile Receiving time information from the smartphone Receiving time information from the smartphone While receiving the time information from your smartphone, the second hand indicates “ACT”. This watch can adjust the time by receiving time information (Year/Month/ Date/Day of the week/Hour/Minute/Second) from the smartphone through the Bluetooth 4.0 when all of the following conditions are satisfied.
  • Page 21: Communication With The Smartphone

    Communication with the smartphone Communication with the smartphone • The type of notification received from the smartphone cannot be set on this watch. Set it on the smartphone referring to the operation manual of your Outline smartphone. In addition to receiving the time information from the connected smartphone, this •...
  • Page 22 Communication with the smartphone Alert Notification profile Proximity profile Communication with the smartphone Incoming calls, email and SMS Disconnection notification The watch will notify you of an incoming message within five seconds of your When the distance between the watch and smartphone becomes too far to keep smartphone receiving it.
  • Page 23 Communication with the smartphone Phone Alert Status profile Communication with the smartphone Stopping the ring tone Checking how the watch vibrates While your smartphone is ringing, you can stop the ring tone of your smartphone You can check the vibration in advance. by pressing and releasing either the lower right button or upper right button Change the mode to [CT].
  • Page 24: Shortcut For Pairing

    Shortcut for pairing Bluetooth 4.0 wireless technology The pairing (see page 28) can also be performed by the simple operation below. This watch utilizes parts duly certified by the adequate technical standards proof • You can operate the buttons while the mode is set to [TME], [L-TM], [PR] or [CT], as a low electric power data communication system wireless station utilities under the Radio Act.
  • Page 25 - Audio video equipment with an antenna input terminal including radios, TVs, Bluetooth 4.0 immediately and consult the nearest Authorized Citizen Service video recorders, and satellite tuners. Noise may occur in the sound and image.
  • Page 26: Adjusting The Time And Calendar Manually [Tme]/[Cal]

    Adjusting the time and calendar manually [TME]/[CAL] Adjusting the time and calendar manually [TME]/[CAL] Rotate the crown to adjust the time. • You can adjust the time in one minute increments. Adjusting the time — [TME] • The hour, minute and 24-hour hands move in conjunction with one another. •...
  • Page 27 Adjusting the time and calendar manually [TME]/[CAL] Adjusting the time and calendar manually [TME]/[CAL] Adjusting the Calendar — [CAL] moves by one step. Press and release the upper right button • The hour, minute and 24-hour hands will indicate the time set in [TME] mode. •...
  • Page 28 Adjusting the time and calendar manually [TME]/[CAL] Adjusting the time and calendar manually [TME]/[CAL] Each minute mark denotes the Change the mode to [TME] (or [L-TM]) to finish the procedure. (See number of years since the last pages 18 and 19) leap year.
  • Page 29: Using Local Time [L-Tm]

    Using local time [L-TM] Using local time [L-TM] Setting the local time The setting range of the time difference from the time set in [TME] mode is ±27 Indicating local time (secondary time) hours in 15-minute increments. The watch can indicate the time of another time zone (known as local time) using Change the mode to [L-TM].
  • Page 30: Using The Chronograph [Chr]

    Using the chronograph [CHR] Using the chronograph [CHR] Upper right button  : The 60-minute chronograph can indicate a maximum of 59’ 59”. Start/Stop/Restart measurement. • While in [CHR] mode, notifications will be through Second hand: watch vibration only. Visual notification by the second The chronograph minute This indicates the hand is disabled in this mode and will be made with...
  • Page 31: Checking And Correcting The Reference Position [302]

    Checking and correcting the reference position [302] [ 3 0 2 ] Checking and correcting the reference position Checking the reference position Check whether the reference position of each hand and indication is accurate. If the time or date is not shown correctly even after proper reception of the time information, check whether the reference position is correct.
  • Page 32 Checking and correcting the reference position [302] Checking and correcting the reference position [302] Correct the current reference position Rotate the crown to correct the reference position of the active hand/ Correct each hand and indication to indicate the correct reference position. indication.
  • Page 33: Troubleshooting

    Avoid anything that will block out the radio wave − the right, consult the or generate noise. nearest Authorized Ensure your smartphone is equipped with Citizen Service Center. Bluetooth 4.0 or higher version and check the − implemented profiles. Restart the smartphone. (Refer to your owner’s −...
  • Page 34 The second hand moves If the second hand still does not move, consult the 10 to 15 This indicates low power. Fully charge the watch. once every two seconds. nearest Authorized Citizen Service Center.
  • Page 35: Resetting The Watch - All Reset

    Troubleshooting Troubleshooting Resetting the watch — All Reset Symptoms Remedies Page When the watch moves in an unstable manner (e.g. the hand does not stop moving, The time and/or date is incorrect. or the watch does not operate even though it has been recharged) due to strong shock or static, etc., we recommend resetting the watch (All Reset).
  • Page 36 Troubleshooting Troubleshooting Make sure the watch is fully charged as outlined on pages 10 to 13 before Be sure to perform the following operations after All Reset. proceeding. . Correct the reference position. Pull the crown out to position After performing the All Reset feature, the watch is in the reference position The second hand moves to indicate the 30 seconds mode.
  • Page 37: Eco-Drive (Solar Powered) Watch Handling Precautions

    Eco-Drive (solar-powered) watch handling precautions Eco-Drive (solar powered) watch handling precautions CAUTION Recharging Precautions • Do not charge the watch at a high temperature (about <Always Make Sure to Recharge Frequently> 60°C/140°F or higher) as doing so may cause the •...
  • Page 38 Eco-Drive (solar-powered) watch handling precautions Eco-Drive (solar-powered) watch handling precautions <Replacement of Rechargeable Cell> WARNING Use Only the Specified Battery • This watch utilizes a special rechargeable cell that does not require regular replacement. However power consumption may increase after using the watch for a number of years due •...
  • Page 39: Water Resistance

    Water resistance Water resistance WARNING Water Resistance • Refer to the watch dial and the case back for the indication of the water resistance of your Water-related use watch. The following chart provides examples of use for reference to ensure that your watch is used properly.
  • Page 40: Precautionary Items And Usage Limitations

    Water resistance Precautionary items and usage limitations • Non-water resistant models are not designed to come into contact with any moisture. Take care not to expose a watch with this rating to any type of moisture. CAUTION To Avoid Injury •...
  • Page 41 Precautionary items and usage limitations Precautionary items and usage limitations • Do Not wear the band too tightly. Try to leave enough space between the band and your skin to CAUTION Precautions (continued) allow adequate ventilation. • Even if your watch has a high level of water resistance, please be careful of the following. •...
  • Page 42 Precautionary items and usage limitations Precautionary items and usage limitations <Magnetism> CAUTION Always Keep Your Watch Clean • Analog quartz watches are powered by a step motor that uses a magnet. Subjecting the watch • Rotate the crown while it is pressed in fully and press the buttons periodically so they do not to strong magnetism from the outside can cause the motor to operate improperly and prevent become stuck due to accumulations of foreign matter.
  • Page 43: Information

    Precautionary items and usage limitations Information CAUTION Caring for Your Watch About Bluetooth • Wipe any dirt or moisture such as perspiration from the case and crystal with a soft cloth. • For a metallic, plastic or rubber watchband, wash any dirt off with water. Remove the small Bluetooth®...
  • Page 44: Specifications

    Specifications Specifications Additional • Solar power function • Power reserve indication (in four levels) functions W760 Analog solar-powered watch Model Type • Overcharging prevention function Timekeeping accuracy Within ±15 seconds per month when worn at normal operation • Insufficient charge warning function (two-second interval movement) temperatures (between +5˚C/41°F and +35˚C/95°F) (without reception) •...

Table of Contents