Table of Contents
Advertisement
Before using this watch
Band adjustment
We do not recommend attempting to adjust the watch band yourself. Special
expertise and experience is required for proper adjustment. If not adjusted
correctly, the band may become detached leading to loss of your watch. (Some
retailers may supply a band adjustment tool with your purchase).
For band adjustment, we recommend you consult the retailer from where the watch
was purchased or your nearest Authorized Citizen Service Center.
Some repair shops may charge a nominal fee for adjustment if the watch was not
purchased directly from them.
Protective stickers
Be sure to remove any protective stickers that may be on your watch (case back,
band, clasp, etc.) Otherwise, perspiration or moisture may enter the gaps between
the protective stickers and the parts, which may result in a skin rash and/or
corrosion of the metal parts.
How to use a specially designed crown/push button
Some models are equipped with a specially designed crown and/or push button(s)
to prevent accidental operation. Please refer to the following chart for use.
4
Screw down crown and screw down push button
Unlock the crown prior to operate your watch.
Unlock
Rotate the crown
Screw down
counterclockwise until it
crown
releases from the case.
Rotate the locking screw
Screw down
counterclockwise, and
push button
loosen until it stops.
Recessed buttons
Press the button with a narrow-tipped object such
as a wooden toothpick.
Before using this watch
Lock
Push the crown in to the
case. With gentle pressure
towards the case, rotate the
crown clockwise to secure
it to the case. Be sure to
tighten firmly.
Rotate the locking screw
clockwise, and tighten
firmly.
5
Advertisement
Table of Contents
