Registering Your Smartphone [Pr] - Citizen YUQ-W760-00M Manual

Registering your smartphone
You need to register each device for connection (this is called "pairing") to use the
Bluetooth 4.0 feature.
• When registration is successful, you can obtain the time information from your
smartphone to correct the time on the watch.
Before registration
• For registration, operation of both your smartphone and the watch is necessary.
For operation of your smartphone, refer to the operation manual of your
smartphone.
• Please ensure the power reserves of both the watch and your smartphone are
sufficient. Be sure to check the power reserve indication of the watch (see page
16) and charge the watch before registration unless the reserve is at level 3 or 2.
28
[PR]
Connection with the registered smartphone
• All information relating to your smartphone once registered with the watch will
be stored in memory, even after disconnection from your smartphone. When you
want to connect the watch with the smartphone you have previously registered,
perform connection (see page 34).
• The watch can store registration information for one smartphone only. If an
another smartphone is registered, all previous information is deleted.
Restarting after turning off the power of your smartphone completely may work
if you have a problem during registration.

Registering your smartphone [PR]

29