Checking And Correcting The Reference Position [302] - Citizen YUQ-W760-00M Manual

Checking and correcting the reference position
If the time or date is not shown correctly even after proper reception of the time
information, check whether the reference position is correct.
What is the reference position?
The base position of all hands and date to
properly indicate the various functions of this
watch.
• Position of the hour hand: 12:00
• Position of the minute hand: 12:00
• Position of the second hand: 12:00
• Position of the 24-hour hand (10:00 sub
dial): 24:00
• Position of date: midway between 31 and 1
• Position of the function hand (2:00 sub dial):
directed towards 6:00
• If any of the hands and/or date do not reflect the correct reference position, the
time, date, and other indications will not be displayed accurately, even if you
synchronize the time with your smartphone.
60
[ 3 0 2 ]
Correct reference positions

Checking and correcting the reference position [302]

Checking the reference position
Check whether the reference position of each hand and indication is accurate.
Change the mode to [ 3 0 2 ].
1
The hands and date will rotate to the current reference
positions stored in memory.
2
Check the current reference position.
By referring to the chart on page 60, ensure the
reference position of each hand and the date are
correct.
• If all reference positions are correct, go to step 3
below.
• If any of the reference positions are incorrect, go to
page 62.
3
Change the mode to [TME] (or [L-TM]) to finish
the procedure.
(See pages 18 and 19)
(See pages 18 and 19)
61