Radio Reception; Tuning To Radio Stations; Programming Radio Stations; Tuning To Preset Radio Stations - Magnavox MME-100 User Manual

Radio Reception

Tuning to radio stations

1
Select TUNER source.
TUNER is displayed briefly.
2
Press down on TUNING à or á and release
button.
The radio automatically tunes to a station
with sufficient reception. Display indication during
automatic tuning: SEARCH.
If a FM station is received in stereo,
shown.
3
Repeat step 3 if necessary until you find the
desired station.
To tune to a weak station, press TUNING à
or á briefly and repeatedly until you have
found optimal reception.
16

Programming radio stations

You can store up to a total of 40 radio stations
in the memory.
Automatic programming
Automatic programming will start with a chosen
preset number. From this preset number
upwards, former programmed radio stations will
be overridden. The system will only program
stations which are not in the memory already.
Press 9 / 3 PRESET or 2; / PRESET 4 (¡1
1
/ 2™ on the remote control) to select the
preset number where programming should start.
Note:
– If no preset number is selected, default is preset
(1) and all your presets will be overridden.
2
Press PROG for more than 2 seconds to
activate programming.
AUTO is displayed and available stations are
programmed in order of waveband reception
strength: FM followed by AM. The last preset
is
STEREO
automatically stored will then be played.
Manual programming
1
Tune to your desired station (see Tuning to radio
stations).
2
Press PROG to activate programming.
PROGRAM
Press 9 / 3 PRESET or 2; / PRESET 4 (¡1
3
/ 2™ on the remote control) on the remote
control) to allocate a number from 1 to 40 to
this station.
4
Press PROG again to confirm the setting.
PROGRAM
the frequency of the preset station are shown.
5
Repeat the above four steps to store other
stations.
You can override a preset station by storing
another frequency in its place.

Tuning to preset radio stations

Press 9 / 3 PRESET or 2; / PRESET 4 (¡1
/ 2™ on the remote control) until the desired
preset station is displayed.
flashes in the display.
disappears, the preset number and