Fm Radio; Antennas - Magnavox MM440 Owner's Manual

3. Wait a few seconds until the unit is automatically paired to the external BT Device.
The indicator "
4. After pairing is complete you may now play music with your external BT Device.

FM RADIO:

1. Power on the unit as previously instructed.
2. Press the MODE Button on the Unit or Remote Control repeatedly indicator
" rAdI0 " appear on the display to enter to Radio FM playback mode. Wait a few
seconds, radio frequency "XX.XX MHz" will appear on the display.
3. To store the available FM stations into the unit (up to 30 stations) at first time use
(or relocate the unit to a new location):
Press the ►II/PP Button on the unit or Remote Control. FM frequency on the

display will start running.
 Wait a few minutes, the unit will automatically store all the available FM
stations into the memory then playback the first station.
Press the I◄◄ or ►►I buttons on the unit or Remote Control repeatedly to
4.
select and play the stored FM station as desired.
If reception is weak, press and release the ◄◄ or ►► buttons on the Remote
5.
Control repeatedly to fine tune.
Or, press and hold the ◄◄ or ►► buttons on the Remote Control until the FM
6.
radio frequency on the display start running to automatically search and play the
next/previous available FM station.

Antennas:

This unit has a FM wire antenna on the rear of unit, which provides adequate reception
in most areas. If reception is weak, unwind and extended to its full length and/or
reassemble the other direction/location to improve the reception.
bt
" on the display will stop blinking.
16