Clock/Timer; Setting The Clock; Setting The Timer; Activating And Deactivating Timer - Magnavox MME-100 User Manual

Setting the clock

1
In standby, press CLOCK.
The clock digits for the hours flash.
Press VOLUME 3 / 4 to set the hours.
2
3
Press CLOCK again.
The clock digits for the minutes flash.
Press VOLUME 3 / 4 to set the minutes.
4
5
Press CLOCK to confirm the time.

Setting the timer

The system can be used as an alarm clock,
whereby the CD or TUNER is switched on at a
set time. The clock time needs to be set first
before the timer can be used.
During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
1
In any mode, press TIMER for more than 2
seconds.
Press VOLUME 3 / 4 (or press SOURCE) to
2
select sound source.
3
Press TIMER to confirm your desired mode.
The selected source
is shown. The clock digits for the hours flash.
Press VOLUME 3 / 4 to set the hours.
4
5
6
7
or
TUNER
CD TUNER

Clock/Timer

Press TIMER again.
The clock digits for the minutes flash.
Press VOLUME 3 / 4 to set the minutes.
Press TIMER to confirm the time.
The timer is now set and activated.
Activating and deactivating
TIMER
In standby or during playback, press
TIMER once.
Display shows
TIMER
disappears if deactivated.
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off
by itself after a set period of time. The clock time
needs to be set first before the sleep timer can
be used.
Press SLEEP on the remote
control once or more.
Display shows SLEEP
and one of the sleep time
options in sequence: 60, 45,
30,15, SLEEP OFF, 60... if
you have selected a time. Once SLEEP is
activated, SLEEP ON scrolls across the display at
repeated intervals.
To deactivate, press SLEEP on the remote
control once or more until SLEEP OFF is
shown, or press STANDBY-ON on the system
or remote control.
SLEEP OFF scrolls across the display.
if activated, and
19