Radio Reception; Tuning To Radio Stations; Programming Radio Stations; Manual Programming - Magnavox MME-110 User Manual

Radio Reception

STANDBY-ON
TAPE CD
TUNER AUX
PROGRAM
DIGITAL
SOUND
REPEAT/
SLEEP
CONTROL

Tuning to radio stations

1
Select TUNER source.
2
Press TUNER again (or BAND on the remote
control) to select the desired waveband : FM or
AM.
Press and hold down on S or T (à or
3
á) until the frequency indication starts to
change, then release.
The display will show "Src" until a radio
station with sufficient signal strength is found.
4
Repeat step 3 if necessary until you find the
desired station.
To tune to a weak station, press S or T
(à or á) briefly and repeatedly until you have
found optimal reception.
16
pg 001-024/MME110/37-Eng
VOLUME
1
PLAY•PAUSE
DYNAMIC BASS BOOST
2
DBB
DSC
3
4
5
16

Programming radio stations

You can store up to a total of 15 radio stations
for both FM and AM bands in the memory.

Manual programming

Tune to your desired station (refer to "Tuning to
radio stations").
Press PROGRAM to activate programming.
flashes in the display.
PROG
Press S or T ( ¡ or ™) briefly and
repeatedly to assign a number from 1 to 15 to
this station.
Press PROGRAM again to confirm the setting.
disappears, the system will resume to
PROG
the last tuned radio station.
Repeat the above four steps to store other
stations.
You can override a preset station by storing
another frequency in its place.
Note:
– During programming, if no button is pressed
within 15 seconds, the system will exit the program
mode automatically.

Tuning to preset radio stations

Press ¡ or ™ on the remote control briefly and
repeatedly until the desired preset station is
displayed.
6/3/02, 12:50 PM
8240 009 34241