Controls; Basic Functions; Switching The System On; Power-Saving Automatic Standby - Magnavox MME-100 User Manual

IMPORTANT:
Before you operate the system, complete
the preparation procedures.

Switching the system on

Press STANBY-ON to SOURCE.
The system will switch to the last selected
source.
press CD, TUNER or TAPE on the remote
control.
The system will switch to the selected source.
To switch the system to standby mode
Press STANBY-ON on the system or remote
control.
If in tape mode or recording mode, press
STOP•OPEN first.
The volume level, interactive sound settings,
last selected source and tuner presets will be
retained in the player's memory.

Power-saving automatic standby

As a power-saving feature, the system
automatically switches to standby 15 minutes
after a tape or CD has reached the end and no
control is operated.

Basic Functions

Adjusting volume and sound

Press VOLUME(VOL 3 / 4 on the remote
1
control) to increase or decrease volume.
Display shows the volume level VOL and a
number from 0-32.
2
Press DBB 1 or DBB 2 (DBB on the remote
control) to switch bass enhancement on or off.
Display shows:
activated.
3
Press MUTE on the remote
control to interrupt sound
reproduction instantly.
Playback will continue
without sound and the display
shows MUTE.
To activate sound reproduction you can:
– press MUTE again;
– adjust the volume controls;
– change source.
or if the DBB is
13