HP Elite x3 Maintenance And Service Manual page 32

2. Gently remove the chassis. You can use suction cups or a thin metal tool to help remove the chassis.
IMPORTANT:
chassis, you must replace both the chassis and battery with a new chassis and new battery.
To install a new battery:
1. Remove the bottom protective film from the battery adhesive, and then attach the battery adhesive to
the battery location (1) on the new chassis.
NOTE:
2. Remove the top protective film from the adhesive on the chassis, position the top of the battery over the
chassis, and make sure the connectors (2) are aligned.
28 Chapter 5 Removal and replacement procedures
Do not remove the battery from the chassis. If you are installing a new battery or a new
Press down the battery adhesive and make sure it is smooth and even.