FINAL DRIVE OIL
Oil
Level Check
Check the final drive oil level when speci-
fied
by
the maintenance schedule.
Place the motorcycle on its center stand
on level ground.
Remove lhe oil filler cap
(1).
Check that the final gear case is filled up
to the lower edge of the oil inspection hole
(2).
Add the recommended oil until it reaches
the lower edge of the oil inspection hole, if
required.
Recommended oil: HYPOID GEAR OIL
SAE #90 (Above SOC!41°F)
SAE #80 (Below SOC!41°F)
42