Rear Wheel Removal - Honda GL1100 interstate Owner's Manual

REAR WHEEL REMOVAL
1. Place the motorcycle on its center
stand.
2. Lift the licence plate up. Remove the
three bolts (1) and remove the sub rear
fender (2).
3. Remove the rear bumper (3) by re-
moving the four bolts (4).
4. Support the fear wheel so it will not
drop when the shock absorbers are
dis~
connected.
S. Remove the axle nut (5).
6. Remove the axle holding bolt (6) and
brake disc cover.
7. Remove the lower shock absorber nut
(7: right side) and bolt (8: left side).
8. Raise the rear wheel so the axle will
clear the muffler.
9.
Pull out the rear axle
(9).
CAUTION:
*
Support the caliper assembly and swing-
arm before removing the rear axle so
that it does not hang from the brake
hose. Do not twist the brake hose.
(I)
Bolts
(2) Sub fear fender
(3) Rear bumper
(4)
Bolts
(5) Axle nut (6) Axle holding bolt
(7) Lower shock absorber nut
(8) Low!; s bSQ
It
(9 Rear axle 5,. . " _