Oil Filter - Honda Goldwing GL1100 Interstate 1981 Owner's Manual

4. FiU the crankcase with approximately
3.2 liters (3.4 U.S. quarts) of the recom-
mended grade oil and install the oil filler
cap.
5. Start the engine and let it idle for a
few minutes.
6. Stop the engine. Make sure the oil
level is at the upper level mark and
there are no oil leaks.
NOTE:
When running in very dusty conditions,
oil changes should be performed more
frequently than specified in the main-
tenance schedule.
2. Insert a new oil filter element. Check
that the O-rings are in good condition
and that all parts·are installed as shown.
3. Install the oil fIlter cover and tighten
the oil filter bolt.
Oil Filter Bolt Torque:
2.7-3.3 kg-m (20-24 ft-lb)
4. Perform steps 4 to 6 of Engine Oil
Change.
OIL FILTER
NOTE:
• Change the oil filter after draining
engine oil.
I. Remove the oil filter bolt, and pull
the oil filter element (I) out of the
oil filter cover.
(I)
Filter clement
(2) O-rings
69