Technical Data - Graco LDP5 Instructions Manual

Technical Data

Flow range*
Maximum Working Pressure
Weight
Dimensions without extension/nozzle
Length
Width
Height
Inlet
Outlet
Operating temperature range
Storage temperature range
Battery**
Wetted parts
Fluid compatibility
Pressure loss
Accuracy†
Units of measurement
Maximum totalizer amount
Maximum recorded dispensed volume
Maximum preset volume (LDP5 Meter only)
* Tested in No. 10W motor oil. Flow rates vary with fluid pressure, temperature and viscosity.
** Battery required to meet safety approvals: Duracell
† At 2.5 gpm (9.5 lpm), at 70°F (21°C), with 10W motor oil and 1 gallon (3.8 l) dispensed. May require calibration;
out-of-box accuracy is +/-1.25 percent.
®
Duracell is a registered trademark of Duracell Inc.
312668ZAA
0.1 to 5 gpm (0.4 to 19 lpm)
1000 psi (69 bar)
3 lbs (1.36 kg)
11 inches (28 cm)
3.25 inches (8.3 cm)
3.25 inches (8.3 cm)
1/2" npt, 1/2" BSPP, 1/2" BSPT
3/8" npt
32°F to 120°F (0°C to 49°C)
-30°F to 120°F (-34°C to 49°C)
9 volt alkaline
stainless steel, nitrile rubber, zinc, CS, LCP
lubricating oils, antifreeze mixtures
90 psi (1.2 bar) @ 5 GPM
+/- 0.5 percent
pints, quarts, gallons, liters (factory set in quarts)
99,999 units
999.99 units
999.9 units
®
MN1604
Technical Data
31